Elastic sheath walkable, with excellent waterproofing power, coverage, adhesion and penetrating.

ACRIGUM

LIGHT GREY, RED OXIDE, GREEN

DATA SHEET

Elastomer coating to water, made to perform any type of waterproofing
horizontal and vertical dimensions. It is composed of a resin dispersion modified with plasticizers polymeric,
mineral fillers, coated, metal oxides, and particular additives which give the product excellent
property anchors and antifessurazioni in addition to a good resistance to moisture, ultraviolet light, and
to atmospheric agents in general. Characterized by ease of application, it is adaptable to surfaces
irregular, allowing, thus, to obtain the manti continuous without joints. It is used for facades, canopies and
roofing flat concrete, asphalt, bitumen, or other building material. To remove the stickiness
surface by the coating and make it walkable in a short time, the surfaces treated, it is sufficient to
sprinkle with talcum powder or flour of quartz, at a distance of some hours from the work completed.

APPEARANCE
COLOR
PACKAGING
CONSERVATION
: Matt.
: Light grey, red ox, green.
: 20 kg x 1pc – 4lt x 1pc .
: Protect from frost. Keep tightly closed in a cool and dry place.

PHYSICAL CONSTANTS AT 20°C
TYPE OF BINDER
SPECIFIC WEIGHT
VISCOSITY
DRYING

THEORETICAL COVERAGE FOR
HAND

Resin, modified acrylic, low VOC.
: 1430 to 1580 ±50 g/cm3 (depending on color).
: Tixotropic.
: Feel 3 ÷ 4 hours. Sopraverniciabile after 24 ÷ 48 hours. Full after some
days.

: 6 to 8 sqm/litre 4 to 5 sqm/kg according to the thickness.

APPLICATION CHARACTERISTICS
APPLICATION
THINNER
DILUTION

: Brush - Roller in wool.
: Drinking water .
: 5% to 20%, depending on the type of application.
MEDIA
SURFACES IN CONCRETE OR ASPHALT PROVIDED IT IS HEALTHY, DRY, CLEAN AND
PREVIOUSLY TREATED WITH A SUITABLE FIXATIVE TO WATER “FIXALL”.
(See briefing Notes for the Treatment of the Surfaces).

WARNINGS
The application is recommended at a temperature between +10°C and +30°C. do Not apply in the presence of
high winds, intense heat, cold, and excessive moisture. Wash the tools with lukewarm water immediately
after use.