Acrylic enamel-alchidico, polished or satin-finish and advanced technology , applicable on wood , metal, masonry, pvc, etc.

Acrylic enamel gloss advanced technology , applicable on wood , metal, masonry, pvc, etc.
APPLICATION CYCLES
ENAQUA can be applied on surfaces already painted, taking care to remove any paint parts phase
of detachment. Wash the surface with water and detergent, and rinse with care. Apply two layers of product.
NEW IRON: remove rust, if any with wire brush or emery cloth. Dust and
apply two coats of anti-rust to the water, interspersed with sanding. Apply two layers of product,
by sanding between slightly after the first hand.
NEW WOOD: apply 2-3 coats of bottom filler on the water interspersed with light sanding. Apply
then two coats of the product, by sanding between slightly after the first hand.
P. V. C. AND PLASTIC MATERIALS: clean and degrease with solvents are suitable and apply a coat of primer to the water,
then proceed to the finish with two coats of the product.
ALUMINIUM: degrease with thinner or wash the surface with water and
detergent, rinse carefully and doing dry. If possible, lightly sand.
Apply a primer to the water, and then finish with one or two coats of the product.


WARNINGS
CLASSIFICATION VOC
Work in well ventilated areas while wearing proper means of individual protection (mask). Operation
sanding, welding, removing, burning off old paint, may generate dust and/or hazardous fumes.
Paints glossy finishes for interior walls and ceilings
Limit value EU VOC directive (2004/42/CE) for these products (cat. A/b, BA type) :100 g/l (2010).
This product contains maximum 100 g/l VOC