CEBOS Reflections Acrylic interior water-based, washable, semicoprente, with metallic reflections.
Warning: Last items in stock!
The products of CeboSi Reflections
Finish acrylic interior water-based, washable, semicoprente, with metallic reflections.
The bottom of water-based acrylic for interior and exterior, which looks slightly embossed.
Additive universal that gives CeboSi Shimmer shades of gold. It is available in the following colours:
CebOro Roman - yellow CebOro Byzantine - red CebOro Etruscan - brown
Staining of CeboSi Fund and CeboSi Reflections:
dye the products in the desired color, with the dyes CeboKit, in the same color, and dosage.
Staining of CeboSi Reflections with CebOro:
add the additive CebOro in CeboSi Reflections colorless, in the desired shade.
Mode of application CeboSi Bottom:
after careful cleaning and grouting of supports, apply CeboSi the Bottom such as in a hand or two up to full coverage, with roller, short hair: in the case of walls are particularly absorbent or powdering surfaces, apply a coat prior to CeboSi Fund diluted 30% with water. Theoretical coverage: 10 square metres per litre
Mode of application CeboSi Reflections and CeboSi Reflections with CebOro:
the product is ready to use and should be applied to the hand with the brush, available in sizes 2.5 and 4 inches. Dip the tool into the product and pass it to the strokes crossed with the effect of a spatula on the prepared surface with CeboSi the Bottom, avoiding baseboards, net (photo 1): to continue the application until you reach the part machined with the tool exhaust, so as to avoid obvious overlaps of color (photo 2). Any defects or shortcomings of the product on the surface can be altered during the application stage.
CeboSi Reflections can also be applied with a glove; dipping the tool into the product and pass it on in circular motions and uniform with a light hand, and as flat as possible (Photo 3).